Hello, welcome to visit DongGuan GongDa Precision Machinery Ltd

DongGuan GongDa Pml Precision Mechanism Ltd

Service Hotline: 85640217
Service Horline: 85640217

Dongguan Factory Address:

NO.6 The East of Chongsheng Road ,Chang'an

Town ,Dongguan City ,Guangdong Province





GD-020 precision  circular saw blade sharpener
GD-026 Front and Rear Angle Gear Grinder
GD-Y3 Screw Tap Grinder
GD-430 Wide-range drill bit grinder
GD-330 End mill sharpener
GD-313 Portable End Mill grinding machine
DetailsCurrent location:Home -> End mill grinder
GD-313C End Mill & Cut Off Composite Sharpener G
Name:GD-313C End Mill & Cut Off Composite Sharpener G
Published:2018-04-14 12:12:35Click rate:

One machine dual purpose, not only can grind the bottom of the knife blade, but also can cut-off the collapsed blade;
One grinding wheel can sharpen Ф3~Ф13 end mill tools;
One grinding wheel can sharpen 2, 3, 4, 6 blades end mill tools;
The left side of the machine is used for grinding the bottom of the knife, the right side is used for cutting the invalid blade;
Grinding angle is 00~50, according to processing needs the concave size of the tool can be adjusted;
Can change the sharpening way and solve the problem of processing;
Can cut the part of collapsed end mill and sharpen the bottom. Operating is convenient and quick, time saving.
Type GD-313C
Name End mill+Cut off the composite grinding machine
Grinding tool Flat end mill
The material of tools Tungsten,HSS
blade of tools 2,3,4,6 blade of end milling
Grinding Range φ3~φ13mm
Grinding Angle 0°~ 5°
Front end tooth Angle
Second relief angle
First relief angle 35°
Power 300W
Voltage 220V  50/60HZ
Speed 5000R.P.M
size 37×19.5×23cm
Gross/Net Weight 20/16Kg

GD-313C End Mill And Cut Off Composite Sharpener Grinding Machine

GD-313C End Mill & Cut Off Composite Sharpener G


DongGuan GongDa Precision Machinery Ltd Copyright© Copyright 2018
*All the pictures, texts and other materials involved in DongGuan GongDa Precision Machinery Ltd.,and shall not be reprinted without permission*
Art and programming: