Dongguan Factory Address：
NO.6 The East of Chongsheng Road ,Chang'an
Town ,Dongguan City ,Guangdong Province
Name：Simple indexing spacer
Published：2018-04-14 12:11:54Click rate：
Simple indexing spacer
The simple indexing spacer is designed for using and indexing in both horizontal and vertical position. It is the most optimum in use for milling machines, grinding machines, drilling machines, and planer etc. The divisions in 2, 3, 4, 6, 12, 24 are permitted any desired angular indexing can be performed too by using a graduated ring on the spindle and a verner.
1. The center through hole is big to be suitable for the large and long work piece.
2. Hardened and ground 24 position master plate, can index the special angle of 15 with excellent accuracy.
3. CC-Type can be used with 2 PCS type 3-Jaw Chuck. Especially, it does similar work. As rotary table when it match with face plate.
4. Rapid indexing and easy operation. It's sharp equipment for mass-production.
5. Super Spacer index include 3 jaw chuck, Face plate dia. 10, 250mm Masking Plates 2, 3, 4, 6, 8, 12.
6. Simple index include 3-jaw chuck, Masking Plates 2, 3, 4, 6, 8, 12
7. Used the key guide block, the center can be corrected quickly and accurately
|Center height mm||149.25||130|
|Center diameter of the spindle mm||Φ119.774||Φ80|
|Height between external centering diameter of the spindle to the base(in vertical position)mm||96||89.5|
|Locating diameter of the spindle mm||Φ212||Φ170|
|Width of the locating key mm||16||16|
|24 divisions individual error||25"||25"|
|Net weight kg||52||33|
|Gross weight kg||60||39|
|Case dimensions mm||405×370×345|| 372×340×304 |