Dongguan Factory Address：
NO.6 The East of Chongsheng Road ,Chang'an
Town ,Dongguan City ,Guangdong Province
Name：GD-020 precision circular saw blade sharpener
Published：2019-01-18 15:12:56Click rate：
The design of the machine is based on the characteristics of the same type, and the advantages of the same type are absorbed and analyzed, and some improvements are made at the same time.
1 preset multiple sets of teeth type, a key multifunctional operation.
The 2 steps can be completed in one time, numerical control grinding, arbitrary tooth type, can improve the efficiency of 3 times, improve the type of tooth extraction operation, improve the precision and extend the service life.
|Saw blade capacity||80-800mm|
|Saw blade thickness||1-7mm|
|Tooth surface angle||5 degree ~+30 degree|
|Tooth tip back angle||6-45 degree|
|The left and right side of the pitch||45 degree of the tooth surface|
|Edge grinding stroke range||Max 25mm teeth / min|
|Edge grinding speed||0.5-6mm/s|
|Working speed||Max 20 teeth / min|
|Negative chamfer grinding||-27 degree|
|The grinding head rotating angle||90 degrees and 180 degree|
|Wheel line speed||26m/s|
|Coolant pump flow||501/min|
|Coolant tank volume||85L|
|Voltage||3 phase 380V|