English Português العربية Español
[Registre-se] [Início de uma sessão]

Cutter master (GD-66)
Cutter master (GD-66)
Modelo: Universal moedor ferramenta
Lugar de origem: China
Certificado: CE,ISO9001:2000
Tempo de entrega: 15days
Pacote: Wooden case







Cutter master(GD-66)
Mail technical parameter:

End mill capacity (dia. Of shank x dia. Of edge x length) 50 x 225 x 250mm, 2" x 9" x 10" 
Swing over table 245mm, 9-3/4" 
Longitudinal travel (X axis) 150mm, 6" 
Cross travel of table (Y Axis) 75mm, 3" 
Max. Wheel:  125 x 50 x 32mm, 5" x 2" x 1-1/4" 
Tilt adjustment for wheelhead +35° -10° 
Air bearing swivel 360° 
Air bearing stroke 250mm, 10" 
Table infeed graduation 0.02mm, 0.001 
Air bearing graduation 6.3MPa 
Pipe joint diameter Z/4" 1
Collet fit for spindle 5C 
Parallelism between two tables 0.01/100mm, 0.01/100 
Parallelism of sleeve center line to worktable 0.01/100 
Motor speed: 2, 800rpm 3, 450/2, 580rpm 
Voltage 220V ,1 phase 
Power 1HP 
Frequency 50Hz



Install T-shaped slot width 12.7mm
Spring chuck 5C
The minimum feed unit 0.0005”
Maximum griding arc radius 3”
Equal dividing 30degree
Parallelish of work hole to base 0.02/60mm
Radial run out of work hole center line(60mm for hole 0.015mm

Max. Stroke of air bearing sleeve: 9"
Collect for work table: 5C
T-shaped slot width for table: 12.7mm
Air consumption: >0.63Mpa
Tracheal joints: 1/4"
Turning angle: 360degree
Parallelism of workhole center line to abse surface: 0.015mm
Radius run out of workhole center line(60mm for hole): 0.015mm









  Atendimento ao Cliente  
Click it

tradeindia Ecplaza Global Alibaba.com Made-in-China
Perfil da Empresa    |    Mapa do Site  |   Contacte-nos |   Início

Tel: 86-0769-85640217 ; Fax: 86-0769-81552096 ;  E-mail: admin@dggongda.com.cn
Name:Nancy lee  ;     Address: No.168 the East of Dezheng Road, Changan Town, Dongguan City, Guangdong PRC.China

     TradersCity.com Free Import Export Trade Leads Valid CSS!